- Cap Screw
- 5/16"-18 thread
- 1.250" UHL
- 9/32" hex key
- Black oxide
- 190,000 PSI

- Cap Screw
- 5/16"-18 thread
- 1.000" UHL
- 9/32" hex key
- Black oxide
- 190,000 PSI

ARP-300-8303 - Nut - 12 point - 7/16"-20 RH thread - 1/2" wrench - 150,000 PSI

ARP-P7 AP 1.00-1C - Stand Bolt -  12 point - 7/16"-14 RH thread - 1.000" UHL - 3/4" wrench - 180,000 PSI

- 7/16"-20 thread
- 1.250" length
- 3/16" hex key
- Black oxide

- 9/16" diameter
- Hardened steel shaft
- Most standard SBC and SBF sets
- 4 snap rings included

- 9/16" diameter
- Hardened steel shaft
- Canfield & TFS High Port SBF sets
- 4 snap rings included

- 9/16" diameter
- Hardened steel shaft
- Edelbrock 7721 SBF sets
- 4 snap rings included

- 9/16" diameter
- Hardened steel shaft
- Canfield & Dart Pro1 SBC sets
- 4 snap rings included

- 9/16" diameter
- Hardened steel shaft
- AFR, Brodix, Profiler SBC sets
- 4 snap rings included

- 9/16" diameter
- Hardened steel shaft
- AFR 180-220 SBC sets
- 4 snap rings included

- 9/16" diameter
- Hardened steel shaft
- Edelbrock 7709/7721 SBF sets
- 4 snap rings included

Shim Kit for setting stand height. Kit contains 8 each - .025", .050" and .100" thick shims.

- Fits most standard 23* SBC heads
- 1.50 intake ratio / 1.50 exhaust ratio
- .100" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits most standard 23* SBC heads
- 1.55 intake ratio / 1.50 exhaust ratio
- .100" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits most standard 23* SBC heads
- 1.60 intake ratio / 1.60 exhaust ratio
- .100" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits most standard 23* SBC heads
- 1.65 intake ratio / 1.65 exhaust ratio
- .100" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits most standard 23* SBC heads
- 1.70 intake ratio / 1.70 exhaust ratio
- .100" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits most standard 20* SBF heads
- 1.60 intake ratio / 1.60 exhaust ratio
- No offset
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits most standard 20* SBF heads
- 1.65 intake ratio / 1.65 exhaust ratio
- No offset
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits most standard 20* SBF heads
- 1.70 intake ratio / 1.70 exhaust ratio
- No offset
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits Brodix Track 1 20* SBF heads
- 1.60 intake ratio / 1.60 exhaust ratio
- No offset
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits Brodix Track 1 20* SBF heads
- 1.65 intake ratio / 1.65 exhaust ratio
- No offset
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits Brodix Track 1 20* SBF heads
- 1.70 intake ratio / 1.70 exhaust ratio
- No offset
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits AFR 227/235 23* SBC heads
- 1.50 intake ratio / 1.50 exhaust ratio
- .300" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits AFR 227/235 23* SBC heads
- 1.55 intake ratio / 1.55 exhaust ratio
- .300" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits AFR 227/235 23* SBC heads
- 1.60 intake ratio / 1.60 exhaust ratio
- .300" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits AFR 227/235 23* SBC heads
- 1.65 intake ratio / 1.65 exhaust ratio
- .300" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits AFR 227/235 23* SBC heads
- 1.70 intake ratio / 1.70 exhaust ratio
- .300" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands

- Fits Profiler P/N 176 23* SBC heads
- 1.50 intake ratio / 1.50 exhaust ratio
- .300" offset int / .100" offset exh
- 2024 Aluminum Alloy Rocker Arms
- A36 Steel Stands