- Cap Screw- 5/16"-18 thread- 1.250" UHL- 9/32" hex key- Black oxide- 190,000 PSI
- Cap Screw- 5/16"-18 thread- 1.000" UHL- 9/32" hex key- Black oxide- 190,000 PSI
ARP-300-8303 - Nut - 12 point - 7/16"-20 RH thread - 1/2" wrench - 150,000 PSI
ARP-P7 AP 1.00-1C - Stand Bolt - 12 point - 7/16"-14 RH thread - 1.000" UHL - 3/4" wrench - 180,000 PSI
- 7/16"-20 thread- 1.250" length- 3/16" hex key- Black oxide
- 9/16" diameter- Hardened steel shaft- Most standard SBC and SBF sets- 4 snap rings included
- 9/16" diameter- Hardened steel shaft- Canfield & TFS High Port SBF sets- 4 snap rings included
- 9/16" diameter- Hardened steel shaft- Edelbrock 7721 SBF sets- 4 snap rings included
- 9/16" diameter- Hardened steel shaft- Canfield & Dart Pro1 SBC sets- 4 snap rings included
- 9/16" diameter- Hardened steel shaft- AFR, Brodix, Profiler SBC sets- 4 snap rings included
- 9/16" diameter- Hardened steel shaft- AFR 180-220 SBC sets- 4 snap rings included
- 9/16" diameter- Hardened steel shaft- Edelbrock 7709/7721 SBF sets- 4 snap rings included
Shim Kit for setting stand height. Kit contains 8 each - .025", .050" and .100" thick shims.
- Fits most standard 23* SBC heads- 1.50 intake ratio / 1.50 exhaust ratio- .100" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits most standard 23* SBC heads- 1.55 intake ratio / 1.50 exhaust ratio- .100" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits most standard 23* SBC heads- 1.60 intake ratio / 1.60 exhaust ratio- .100" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits most standard 23* SBC heads- 1.65 intake ratio / 1.65 exhaust ratio- .100" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits most standard 23* SBC heads- 1.70 intake ratio / 1.70 exhaust ratio- .100" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits most standard 20* SBF heads- 1.60 intake ratio / 1.60 exhaust ratio- No offset- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits most standard 20* SBF heads- 1.65 intake ratio / 1.65 exhaust ratio- No offset- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits most standard 20* SBF heads- 1.70 intake ratio / 1.70 exhaust ratio- No offset- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits Brodix Track 1 20* SBF heads- 1.60 intake ratio / 1.60 exhaust ratio- No offset- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits Brodix Track 1 20* SBF heads- 1.65 intake ratio / 1.65 exhaust ratio- No offset- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits Brodix Track 1 20* SBF heads- 1.70 intake ratio / 1.70 exhaust ratio- No offset- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits AFR 227/235 23* SBC heads- 1.50 intake ratio / 1.50 exhaust ratio- .300" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits AFR 227/235 23* SBC heads- 1.55 intake ratio / 1.55 exhaust ratio- .300" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits AFR 227/235 23* SBC heads- 1.60 intake ratio / 1.60 exhaust ratio- .300" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits AFR 227/235 23* SBC heads- 1.65 intake ratio / 1.65 exhaust ratio- .300" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits AFR 227/235 23* SBC heads- 1.70 intake ratio / 1.70 exhaust ratio- .300" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
- Fits Profiler P/N 176 23* SBC heads- 1.50 intake ratio / 1.50 exhaust ratio- .300" offset int / .100" offset exh- 2024 Aluminum Alloy Rocker Arms- A36 Steel Stands
